Product Description
SR01 is a 2 component gap-filling cyanoacrylate especially developed for the bonding and rapid repair of a wide range of substrates. Maximum gap filling (2mm) with minimal shrinkage combined with accuracy provided by the static mixer make SR01 a perfect gap-filling repair product and bonder.
Product Properties
Technology |
Cyanoacrylate |
Chemical Type |
2-Ethyl cyanoacrylate |
Appearance (Part A) |
Clear/Cloudy Gel |
Appearance (Part B) |
WhiteGel |
Appearance (Mixed) |
Cream Opaque Gel |
Viscosity (Part A) |
175,000-220,000 mPa·s |
Viscosity (Part B) |
60,000-80,000 mPa·s |
Cure System |
Component mixing |
Open time at 25 °C |
3-4 minutes |
Working Time at 25 °C |
10 Minutes |
Fixture Times
Mild Steel |
5-10 seconds |
Grit Blasted Mild Steel |
10-15 seconds |
Stainless Steel |
15-20 seconds |
Aluminium |
5-10 seconds |
Polycarbonate |
10-15 seconds |
ABS |
20-30 seconds |
PMMA |
70-90 seconds |
Pine Wood |
30-45 seconds |
Beech Wood |
7-15 seconds |
Bonding Performance
Tensile shear strength according to ISO4587.
Mild Steel |
15-18 N/mm² |
Grit Blasted Mild Steel |
18-20 N/mm² |
Stainless Steel |
14-16 N/mm² |
Aluminium |
5-7 N/mm² |
Polycarbonate |
7-12 N/mm² |
ABS |
9-13 N/mm² |
PMMA |
8-11 N/mm² |
Pine Wood |
10-14 N/mm² |
Beech Wood |
13-16 N/mm² |
Storage Conditions
Recommended Storage Temperature is 2-10 °C. Maximum storage temperature is 25°C. Shelf life at the
recommended temperature (unopened) is 9 months
Plastic containers do not offer a complete barrier, store product away from other chemicals and sources of
humidity. Strong light exposure can discolour products.
Note:
The data contained herein are for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user’s responsibility to determine the suitability for use in their specific application. Xtraloc recommend each user test their proposed application before repetitive use, this data sheet is merely a guide. Xtraloc Limited accepts no liability arising out of the use of this information of the products described herein.